8613858502138
webmaster@cnhengsen.com
enLanguage
Search
Products
Home / Products / HVAC Valve / Magnetic Valve / Details
24 Volt Dc Water Solenoid Valve

24 Volt Dc Water Solenoid Valve

24 volt dc water solenoid valve is an automatic device that controls the flow of fluid through electromagnetic force. It is commonly used in various liquid, gas and air pressure systems. Its working principle is that when the power is on, the electromagnetic force generated by the coil moves the valve core to open or close the valve; when the power is off, the spring resets the valve core to restore the initial state.
Send Inquiry
24 Volt Dc Water Solenoid Valve

 

 

 

Product Features

Low power consumption: 24V DC power supply is adopted, which is energy-saving and environmentally friendly, and suitable for long-term continuous work.
Compact structure: small size, flexible installation, suitable for small space.
Quick response: it can be opened and closed quickly after power on, suitable for systems that require frequent operation.
High reliability: stable operation, strong durability, and reduced maintenance frequency.
Silent design: compared with AC solenoid valves, DC water solenoid valves have less noise when working and run more quietly.

IMG9750

Installation and Maintenance

 

 

When installing, ensure that the fluid direction is consistent with the arrow mark on the valve body, and avoid installing in a humid or corrosive environment. Regularly check the connection of the solenoid coil and the wear of the seal to ensure long-term stable operation.

 

 

IMG9759


◆Main body material: forged brass valve body, seal PTFE/HNBR

◆Actuator torque: 3.5Nm

◆Valve opening torque: <1N.m

◆Nominal pressure: 1.6MPa

◆Working medium: water

◆Fluid temperature 5~95℃

 

FAQ

 

1.How to judge whether the power-on status of a 24 volt dc water solenoid valve is normal?
You can judge by testing whether the voltage at both ends of the coil is 24V and listening to the "click" sound when the valve responds. If there is no response, it may be a coil damage or power supply problem.

 

2.If the solenoid valve is not used for a long time, will there be any problems?
A solenoid valve that has not been used for a long time may cause the valve core to be stuck due to impurities accumulated inside. It is recommended to clean and test it before use.

 

3.Can a temperature sensor be installed on the solenoid valve coil?
Yes, some application scenarios may require monitoring the coil temperature to prevent overheating damage, and the temperature sensor can serve as an early warning.

 

4.Can a 24 volt dc water solenoid valve be used in outdoor environments?
In outdoor applications, it is necessary to select a solenoid valve with a higher waterproof level. The protection level above IP65 can effectively prevent the intrusion of water and dust.

 

5.What is the difference between a 24-volt solenoid valve and a 12-volt solenoid valve?
The main difference is the different working voltages. The 24-volt solenoid valve can provide greater control and is more suitable for industrial environments, while the 12-volt solenoid valve is often used in small equipment and home systems.

 

 

Hot Tags: 24 volt dc water solenoid valve, China 24 volt dc water solenoid valve manufacturers, suppliers, factory, 410a Charging Hose, Ac Gas Charging Hose, Dynamic Balancing Valve, 28mm 2 Port Valve, 3 Way Motorized Valve, Air Conditioner With Thermostat

Send Inquiry