Whether in domestic water supply, HVAC systems, industrial pipelines or agricultural irrigation applications, our 15mm brass ball valves can provide stable and reliable fluid control solutions. Choosing our products, you can not only get an efficient fluid control experience, but also enjoy high-quality services and support. Let us help you optimize fluid management, improve system performance, and ensure that every drop of water flows freely!
◆ Applicable refrigerants: compatible with new refrigerants including HFO, flammable refrigerants, etc.
◆ Maximum working pressure: 9MPa.
◆ Applicable medium temperature: -30℃~+120℃.
◆ Applicable ambient temperature: -20℃-+60℃.
◆ Only 1/4 turn (90°) is required from full open to full closed, and there is a rotation limit from full open to full closed.
◆ Only 1/4 turn is required to fully open from the closed state.
◆ Equipped with a limit switch, it can be fully opened or fully closed.
Recommendations for use
Installation requirements: It is recommended to install in a horizontal position to ensure optimal operation and easy maintenance.
Regular inspection: Regularly check the sealing and overall condition of the valve, and replace worn seals in time.
Protective measures: When used in extreme weather or corrosive environments, it is recommended to take protective measures to extend the service life of the valve.
FAQ
1. If the handle of a 15mm brass ball valve is difficult to operate, what could be the reason?
Possible reasons include foreign matter obstructing the valve or seal wear causing jamming. It is recommended to check the inside of the valve and clean it, and replace the seal if necessary.
2. What is the service life of a 15mm brass ball valve?
The service life is affected by many factors, such as fluid type, operating temperature, pressure, and operating frequency. Generally, a good brass ball valve can last for several years or even longer under normal use conditions.
3. How to avoid problems with 15mm ball valves due to long-term non-use?
It is recommended to operate the valve regularly, even when not in use, to prevent seal deformation and valve jamming. In addition, the condition of the seal should be checked regularly and lubricated or replaced if necessary.
4. What should be paid attention to when using a 15mm ball valve in a high temperature environment?
When used in a high temperature environment, ensure that the operating temperature of the valve does not exceed its specified range. Excessive temperature may cause aging or damage to the seal, thereby affecting the performance of the valve.
5.How does the internal structure of a 5.15mm brass valve affect its performance?
The internal structural design of the valve determines the efficiency and resistance of its fluid flow. The full-bore design helps reduce flow resistance and ensures smooth passage of fluid, while the sealing design ensures good sealing.
Hot Tags: 15mm brass ball valve, China 15mm brass ball valve manufacturers, suppliers, factory, 2 Wire Digital Room Thermostat, Pressure Independent Balancing Valve, 28mm 2 Port Zone Valve, 3 Way Electric Ball Valve, 1 Inch Valve, Ball Valve