Cheap and Fine
Long Service Life
Impact-proof Design
Easy Installation
Our 2 Wire Digital Room Thermostat is a device specifically designed to upgrade your room temperature control system. It shines among its peers with its digital, easy-to-use and efficient design.
1.Digital and precise temperature control: The 2 Wire Digital Room Thermostat is equipped with advanced digital sensors that can accurately measure and adjust the temperature of the room. You simply set the desired indoor temperature, and the device automatically adjusts heating or cooling to reach the preset temperature.
2.Easy to install and use: With just two wires connected, this thermostat can be installed and set up efficiently, and its user-friendly interface and clear instructions make it easy to operate.
3.Energy saving and high efficiency: Through accurate temperature control, energy can be effectively saved and electricity costs reduced.
4. Strong compatibility: suitable for most HVAC systems and heating equipment, whether it is electric heating, gas heating or water heating system, can achieve seamless cooperation.
5. Beautiful design: With a modern simple design and bright digital display, this thermostat is not only the ideal choice for your home temperature control, but also the highlight of interior decoration.
6. Comprehensive function: with temperature memory, temperature difference control, overheating protection and other functions, to provide you with a comprehensive and humane experience.
While keeping your home warm and comfortable, our 2 Wire Digital Room Thermostat can help you achieve energy and power savings, a device that no modern home and office space can or will have.
|
What does WKQ-J01 do?
Mechanical air-conditioning thermostat can be used in commercial,industrial and civil construction,and can control the fan coil of center air-condition endmost equipment, motorized valve and damper.It is used for keeping the temperature constant according to your operation.All switches are toggle switch,easy to operate.Matching recommendation:DQF series motorized ball valve.
|
◆ Temperature control range: 10~30℃
◆ Control Precision: when 20℃，±0.8℃
◆ Temperature sensing element: precise metal monopole inflated film box
◆ Voltage Rating: 220VAC±10%50/60Hz
◆ Current Rating: ＜6A（Resistive load）＜2A（Inductive load）
◆ Lead connection: Combined terminal/suitable for maximum 1.5 mm wire
◆ Cover material: Flame-retardant engineering plastic, milky white
◆ Thermostat contact life: ≥200,000 when it is 220V
◆ Toggle switch life: ≥ 20,000 times
◆ Working environment: 0~50℃，10~90%RH, no dew
◆ Storing Temperature: -40~70℃
◆ The thermostat should be vertically installed on the indoor wall.The distance to the floor must be about 1.5m high to make sure that the thermostat can get enough airflow.
◆ There must be no heat source and direct sunlight on the thermostat in the room.
◆ Firstly loose the screw of the cover and remove it.Secondly pass the wire through the long hole which is on the upper left side of the base plate.Thirdly connect and fasten the combined terminal. Please do not dismantle the adjusting button during the operation
◆ Pass the wire through the square hole which is on the upper right side of the base plate.And connect and fasten the wire according to the wiring diagram.
◆ Fasten the base plate to the junction box with the matching screws.
◆ Put the switch and it's plate to the bottom (marked COOL.3),install the cover. Make sure all the parts are in the right place.Then tighten all the screws.
◆ The matching terminal junction box is built-in type. Its size is 86x96x32
Hot Tags: 2 wire digital room thermostat, China 2 wire digital room thermostat manufacturers, suppliers, factory, 2 Wire Digital Room Thermostat, Digital Thermostat For Home, 12v Digital Thermostat, 12v Thermostat, Room Thermostats, Digital Home Heating Thermostat