8613858502138
webmaster@cnhengsen.com
enLanguage
Search
Products
Home / Products / HVAC Valve / Magnetic Valve / Details
1 Inch Solenoid Valve 24v

1 Inch Solenoid Valve 24v

1 inch solenoid valve 24V is an automatic fluid control device driven by a solenoid coil, suitable for the switch control of various fluid media such as water, air, oil, etc. The 24V voltage design makes it suitable for low-voltage power supply systems, with higher safety, especially suitable for occasions requiring safety control.
Send Inquiry

Product advantages

 

 

● Low power consumption design, energy saving and environmental protection
● High safety, suitable for various low-voltage occasions
● Quick response, suitable for frequent opening and closing operations
● High durability, low maintenance cost

 

Technical Parameters

◆Main body material: forged brass valve body, seal PTFE/HNBR

◆Actuator torque: 3.5Nm

◆Valve opening torque: <1N.m

◆Nominal pressure: 1.6MPa

◆Working medium: water

◆Fluid temperature 5~95℃

IMG9759

 

FAQ

 

1. Is it normal for the coil of a 1 inch solenoid valve 24V to heat up?
It is normal for the coil of a solenoid valve to heat up when it is powered on, especially when it is kept open for a long time, which will generate a certain amount of heat. Most solenoid valves are designed to work normally within the temperature rise range. However, if the temperature is too high, it may be that the coil voltage does not match or there is an overload. The voltage, working environment and power-on time should be checked. If necessary, the coil can be replaced or a solenoid valve with a heat dissipation function can be selected.

 

2. Can a 1 inch solenoid valve 24V control liquids with particles?
In general, standard 24V solenoid valves are not suitable for controlling liquids containing particles, because particles may cause the valve core to get stuck or damage the seal. If you need to control a fluid containing particles, it is recommended to select a solenoid valve with a filter device or a valve designed for such a medium to ensure long-term stable operation.

 

3. How to prevent the water hammer effect of a 1 inch solenoid valve 24V?
The water hammer effect is a shock wave caused by a sudden change in the fluid flow rate, which may damage the solenoid valve and the piping system. To reduce the water hammer effect, you can choose a solenoid valve with a slow opening/closing function, or install a buffer in the system. In addition, reasonable design of pipeline layout and avoiding rapid flow changes can also help reduce the water hammer effect.

 

Hot Tags: 1 inch solenoid valve 24v, China 1 inch solenoid valve 24v manufacturers, suppliers, factory, 410a Charging Hose, Digital Home Thermostat, 2 Inch Copper Elbow, 24v Room Thermostat, Three Way Globe Valve, Copper Reducing Tee Fitting

Send Inquiry