8613858502138
webmaster@cnhengsen.com
enLanguage
Search
Products
Home / Products / HVAC Valve / Magnetic Valve / Details
2 Way Solenoid Valve 12v

2 Way Solenoid Valve 12v

2 way solenoid valve 12v is an automation component used to control the switch of liquid and gas fluids, suitable for low-voltage power supply systems. The power supply requirement of this solenoid valve is only 12V DC, so it has low energy consumption and high safety, and is often used in occasions that require higher safety standards.
Send Inquiry
2 Way Solenoid Valve 12v

 

This solenoid valve only needs 12V DC power supply, low power consumption and safe operation, and is particularly suitable for environments with strict voltage requirements, such as battery-powered, solar-powered, etc. The two-way design has an inlet and outlet, and through the rapid opening and closing of the electromagnetic coil, it ensures the stable flow or cutoff of the fluid under the set state, and has excellent sealing performance, which can effectively prevent leakage and improve the operating efficiency and reliability of the system.

 

Product Features


◆Main body material: forged brass valve body, seal PTFE/HNBR

◆Actuator torque: 3.5Nm

◆Valve opening torque: <1N.m

◆Nominal pressure: 1.6MPa

◆Working medium: water

◆Fluid temperature 5~95℃

IMG9759

 

Product Features

 

 

Low voltage power supply: 12V power supply, with high safety and low energy consumption, especially suitable for environments that require low voltage control, such as outdoor equipment or battery-powered systems.

 

Two-way design: The two-way solenoid valve has one inlet and outlet, and the fluid path design is simple, which can effectively reduce flow loss and improve fluid transmission efficiency.

 

Good sealing: The valve is equipped with high-quality seals to ensure no leakage, and can maintain a stable sealing effect under high and low pressures, extending the service life.

 

Quick response: The solenoid valve can open and close quickly, and respond instantly when the power is on or off, which is suitable for occasions with frequent opening and closing.

 

FAQ

 

1. Can the 2 way solenoid valve 12v be used for a long time in an outdoor environment?
12V solenoid valves are suitable for outdoor environments, but certain protective measures should be ensured. Standard models may not be waterproof and dustproof. In humid or dusty environments, it is recommended to use models with higher protection levels, or install a waterproof cover or protective box on the outside of the solenoid valve to extend its service life.

 

2. Is it normal for the coil of the 12V solenoid valve to heat up?
It is normal for the solenoid valve coil to heat up after being energized, but it should be within a reasonable range. If the temperature is too high, it may be caused by the coil being energized for too long or the voltage not matching. It is recommended to use intermittent control when the power is on for a long time to reduce heating and extend the life of the coil.

 

3. Will the 2 way solenoid valve 12v close automatically after power failure?
The normally closed 12V solenoid valve will automatically close when the power is off, while the normally open type will remain open when the power is off. Select the corresponding model according to different application requirements. For example, the normally closed type is suitable for applications where the water flow needs to be cut off when the power is off.

 

 

Hot Tags: 2 way solenoid valve 12v, China 2 way solenoid valve 12v manufacturers, suppliers, factory, Electric Motorized Ball Valve, Refrigeration Hand Valve, High Pressure Motorized Ball Valve, 24VAC Water Solenoid Valve, Three Way Globe Valve, Globe Type Control Valve

Send Inquiry