3 8 solenoid valve 12v
Diameter specification: The 3/8-inch design makes this solenoid valve suitable for small and medium-sized flow liquid and gas control, meeting a variety of fluid transmission needs.
Durable material: The valve body is usually made of brass or stainless steel, with good corrosion resistance and pressure resistance, suitable for a variety of fluid media, including water, air and oil.
Quick response: The solenoid valve has a fast response speed and can be opened and closed quickly, which is suitable for frequent switching applications and improves the efficiency of the system.
Easy installation: The compact structure and standardized interface make it easy to install in a small space, and the maintenance is simple, which reduces the cost of use.
Technical Parameters
◆Main body material: forged brass valve body, seal PTFE/HNBR
◆Actuator torque: 3.5Nm
◆Valve opening torque: <1N.m
◆Nominal pressure: 1.6MPa
◆Working medium: water
◆Fluid temperature 5~95℃
FAQ
1. Will the voltage fluctuation of the 3 8 solenoid valve 12v affect the work?
Yes, voltage fluctuation may cause the solenoid valve to not work properly. It is recommended to use a voltage regulator in the power supply line to ensure that the solenoid valve receives a stable voltage.
2. Is it normal for the coil of the 3 8 solenoid valve 12v to heat up?
It is normal for the solenoid valve coil to heat up after power is turned on, but the temperature should not be too high. If the temperature is found to be abnormal, it may be due to continuous power-on time for too long or voltage mismatch. It is recommended to turn off the power and cool down in time.
3. What is the difference between the normally closed type and the normally open type of the 12V solenoid valve?
The normally closed solenoid valve automatically closes when the power is off, which is suitable for applications to prevent fluid leakage; the normally open type remains open when the power is off, which is suitable for occasions that require continuous flow. Choose the appropriate type according to the specific application.
4. Can the solenoid valve adjust the flow?
The 12V solenoid valve is mainly used for the opening and closing control of the fluid and does not have a precise flow adjustment function. If the flow needs to be adjusted, it is recommended to use a proportional solenoid valve.
Hot Tags: 3 8 solenoid valve 12v, China 3 8 solenoid valve 12v manufacturers, suppliers, factory, Motorized Three Way Valve, 1 Inch Ball Valve, 3 8 Refrigeration Ball Valve, 90 Copper Elbow, Motorized Solenoid Valve, Rotary Actuator